MP3362

MP3362

Single-String, 3V Minimum V_IN, 36V V_OUT, Boost LED Driver

Datasheet

Description

The MP3362 is a fixed-frequency converter ideal for low-current and high-current boost applications. The low 0.2V feedback voltage offers higher efficiency in white LED driver applications.

The MP3362 regulates the output voltage up to 36V with efficiency as high as 95%. Current mode regulation and external compensation components allow the MP3362 control loop to be optimized across a wide variety of input voltages.

The MP3362 supports analog dimming and PWM dimming on the same pin. A <2kHz input dimming frequency initiates PWM dimming, while an >5kHz input initiates analog dimming.

Soft start, cycle-by-cycle current limiting, and input under-voltage lockout prevent overstressing or damaging sensitive external circuitry during start-up or potential overload current conditions.

The MP3362 is available in a TSOT23-8 package.

Advantages Include:

Wide input voltage range and high peak current
Internal power switch and high efficiency
Analog dimming and PWM dimming
Good circuit protection and AECQ-100 available

Features & Benefits

3.0V to 36V Input Voltage Range
4A Peak Current Limit
0.3µA/0.5µA Shutdown Current and 200mV FB Voltage
Configurable 200kHz to 2.2MHz fsw, Sync fsw Function
Internal 80mΩ/40V Power Switch, 95% Efficiency
Analog/PWM Dimming
LED Short/Open, UVLP, OVP, FB Short Protection
Smoke Free for Adjacent Pin Short (MPQ3362-AEC1)

Active Part Numbers:

MP3362GJ-P MP3362GJ-Z

Meaning of P & Z

Related Products

EVQ3362-J-00A Single-String, 3V V_{IN_MIN}, 36V V_OUT, Boost LED Driver Evaluation Board, AEC-Q100

The EVQ3362-J-00A is an evaluation board designed to demonstrate the capabilities of the MPQ3362, a boost LED driver that is ideal for low-to-high current boost applications. The MPQ3362’s low 0.2V feedback voltage (V_FB) offers higher efficiency in white LED (WLED) driver applications. It can regulate the output voltage (V_OUT) up to 36V, with up to 95% efficiency. Current mode regulation and external compensation optimize the MPQ3362’s control loop across a wide 3V to 36V input voltage (V_IN) range.

The MPQ3362 supports analog dimming and pulse-width modulation (PWM) dimming on the EN/DIM pin. A <2kHz input dimming frequency initiates PWM dimming, while a >5kHz input dimming frequency initiates analog dimming.

Soft start (SS), cycle-by-cycle current limiting, and V_IN under-voltage lockout (UVLO) prevent the device from overstress or damage. This protects the sensitive external circuitry during start-up and underload/overload conditions. The MPQ3362 is available in a TSOT23-8 package.

$50.00
+ tax